24V(4~6A) Vehicle Charger

Model ES24V4A-I ES24V5A-I ES24V6A-I
Dimensions(mm) Long * wide * high :128*122*65(mm)
Output maximum current(A) 4 5 6
Maximum power point(W)  120 150 180
Input voltage(VAC) 100V~264V
Output voltage(VDC)  Lead-acid battery:31V; VRLA:29.4V;(customizable)
Applicable battery voltage 24V lead-acid battery pack, (Customizable, Lithium battery optional)
Maximum efficiency 93%
Output voltage regulation precision ±1%
Output current accuracy ±1%
Working temperature -30℃~45℃
Classes of seismic measure SAEJ1378
Cooling mode Self-cooling
Over temperature protection 75℃±5
Input under-voltage protection (VAC) Under-voltage point 90V
Output over-voltage protection (VDC) 31V±1
Output over-current protection (A) >110%*Maximum charge current
Output short circuit protection When the output is short-circuited, charger shutdown, and automatic recovery after short-circuit solved.
Battery reverses protection Charger shutdown and alarm when the wire is connected reversely, it will automatically resume after wiring correctly.
Outline dimension

MHE battery charger, material handling equipment charger

  • Charger integrates active power factor correction (PFC), can achieve zero pollution of the power grid and avoid the impact of large current grid;
  • Input voltage range is very wide, AC185V-AC264V, suitable for any region’s voltage level of the world, have a great convenience for the power grid fluctuations and vehicle exports.
  • The efficiency is very high, can reach more than 93%, the traditional charger can only reach about 80%.
  • The intelligent temperature compensation function of the charging process can avoid the damage caused by the over charge or under charge of the battery, and the service life of the battery can be prolonged.
  • Do the internal charger seismic processing, seismic grade up to SAEJ1378, fully meet the electric vehicle-using standard.
  • Use the LLC resonance technology, whole charging process working under soft switching condition, with the less heating of the whole machine.
  • (MHE battery charger, material handling equipment charger)
  • Single Chip Microcomputer (SCM) according to the lead-acid batteries tolerance current capacity, life curve, gas analysis point and other information to complete the full charge of the whole process;
  • With the environmental temperature compensation function, to ensure that the temperature of the weather conditions, can automatically resist over-charge and under-charge;
  • With pulse charging function, the battery is filled with the premise of ensuring the best life of the battery;
  • After three paint processing and dustproof design, the reliability of the operation is improved;
  • With digital display function, can display online charging current, voltage, charging time;
  • (MHE battery charger, material handling equipment charger)